Home

Woody's 4x4 | Fabrication

1976 & Up CJ5 Frame in powder coat finish. Includes sleeved for shackle reversal kit. - $1,700.00

Base mounting plate for roll cages - X members, etc.
CJ2A Manual
No Output

4" x 4"

#WOO4BP - $3.50 Each

Base Plate Mounting for Roll Cages

  • 4x4” with 3/8” holes, 3/16” thick

 

3" x 3"

#WOO3BP (Right in picture) - $3.00 Each

Base Plate Mounting for Roll Cages

  • 3x3” with 3/8” holes, 3/16” thick.

 

Gas Can Locking Strap

3" Crotch Bolt Assembly

#TL004909101 - $8.00 Each

3” Tower Tab 1/4” Thick

  • 3” Crotch
  • 5/8” hole
  • 1/4” thick
  • Top of crotch to center of 5/8” hole, 1 3/4”
  • Great for traction bars & Link Suspension

 

CJ2A Manual
No Output

3/8" Rod End

#MGBSPF-6 - $12.50 Each

3/8” Rod End

  • Linkage made smooth, Good for Shift linkage, Clutch linkage etc.
  • Other size’s not shown - 1/4”, 7/16”, 1/2”, 5/8”
  • Male & Female Rods available.

 

5/16" Rod End

#MGBCF5 - $12.00 Each

5/16” Rod End

  • Linkage made smooth, Good for Shift linkage, Clutch linkage etc.
  • Other size’s not shown - 1/4”, 7/16”, 1/2”, 5/8”
  • Male & Female Rods available.

 

Gas Can Locking Strap

3/4" Chrome Moly Rod Ends & Accessories

  1. #BAL553 - Rod End spacer .45” thick - $7.00 Each
  2. #BAL681 - Safety Washer .30” thick - $7.00 Each
  3. #BAL510 - High Angle Spacer .40”thick, 5/8” Bolt - $13.00 Each
  4. #MGBCF12 - Female Rod End .875”thick - $32.50 Each
  5. #RE13010 - 3/4” x 3/4” x L.H. Rod End .875” Thick - $30.00 Each
  6. #RE13030 - 3/4” x 3/4” x R.H. Rod End .875” Thick - $30.00 Each
  7. #FAS36966 - 3/4” Jam Nut L.H.
  8. #FAS36266 - 3/4” Jam Nut R.H.
  9. #RERM12000 - 3/4” L.H. Tube Adapter for 1” ID Tube. - $12.00 Each
  10. #RERM12010 - 3/4” R.H. Tube Adapter for 1” ID Tube. - $12.00 Each

 

Gas Can Locking Strap

7/8” 14 TPI Chrome-Moly Rod Ends & Accessories

  1. #BAL565 - 7/8” to 3/4” step down spacer .065 thick. - $7.50 Each
  2. #BAL566 - 7/8” to 5/8” step down spacer .065 thick. - $7.50 Each
  3. #BAL512 - High 7/8” (For 5/8” bolt) .595” thick. - $15.00 Each
  4. #BAL914 - 7/8” L.H. Rod End .875” thick. - $39.95 Each
  5. #BAL913 - 7/8” R.H. Rod End .875” thick. - $39.95 Each
  6. #FAS36968 - L.H. Jam Nut 7/8” - $2.50 Each
  7. #FAS36267 - R.H. Jam Nut 7/8” - $2.50 Each
  8. #BAL220 - 7/8” Tube Inserts - 14 TPI L.H. - $15.95 Each
  9. #BAL219 - 7/8” Tube Inserts - 14 TPI R.H. - $15.95 Each

 

CJ2A Manual
BAL 912

7/8" Rod End L.H.

#BAL911 - $50.00 Each

  • 7/8” x 3/4” L.H. 14 TPI

 

7/8" Rod End R.H.

#BAL912 - $50.00 Each

  • 7/8” x 3/4” R.H. 14 TPI

 

Rod End
Tie Rod End

#BALXM-16 - $89.50 Each

Rod End 1 1/4” x 1”R.H.

  • Big 1 1/4” x 1” Chrome-Moly
  • Usually for suspension & H.D. Traction systems.

#BAL1.25-12TPI - $4.00 Each

  • 1 1/4” 12TPI Jam Nut

 

 

 

 

 

#TL004920202 - $50.00 Each

  • 7/8” H.D. Tie Rod End - R.H.

#TL004920232 - $50.00 Each

  • 7/8” H.D. Tie Rod End - L.H. (GM Taper & Thread size 7/8” x 18TPI)

#BAL713/714 - $8.00 Each

  • 7/8” Jam Nut

#BAL225/226 - $15.95 Each

7/8” Tube Inserts

  • Welded Steering Linkage IS NOT D.O.T. street legal.
  • DOM Tube & good welding is very strong & great for off road.

-TOP-

Information & Store Location

6408 St. John's Road
Vancouver, WA 98661

 

Hours: 8:30 to 6:00 PST Monday thru Friday

 
ORDERS ONLY:
1-800-7-WOODYS (800-796-6397)
INFORMATION:
(360) 693-6840
FAX:
(360) 693-0067

© Copyright 2011 Woody's 4x4, Inc. All Rights Reserved.